Di-804hv pptp setup guide

Support 30 profiles for IPSec tunnel. Support 25 profiles for Virtual Server. New Feature: 1. Added VPN Wizard feature. Keepalive with ARP added. Not allow IP addresses "X. Fix: Cannot forward ports when using auto-backup function with dial-up. Add the check-box " Do not change the TTL value ". Add QoS function. Static and dynamic VPN connection priority fix. You can also manually type in the MAC address.

You will need to. The subnet for the DIHV is preconfigured to Configurations can be made in, but not recommended. Configure this section only if you have an analog dial-up account. Otherwise click Next to skip. This information is provided by your ISP. The Dial-up Account is also known as username. Click on Restart button to finalize the settings made. In this case WAN represents the mode in which you connect to the Internet. If you are uncertain, please ask your ISP which of the.

Dial-up users can select this option to connect to their ISP through an analog dial-up modem if broadband connectivity. This is optional, but may be required by some ISPs. The host name is the device name of the Router.

If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped. Enabling this feature will connect your router to the Internet using a dial-up service if your broadband connection becomes unavailable.

A subscription to a dial-up service is required for the auto-. Optional Check with your ISP for more information if they require the use of service name. Enter a maximum idle time during which Internet connection is maintained during inactivity.

To disable this feature, enable Autoreconnect. Most Dial-up users will select this option to connect to their ISP through an analog dial-up modem. This feature can be used as a back-up when your broadband connectivity is unavailable. This setting is used to optimize the communication quality between the ISP and your analog dial-up modem.

Initialization string - optional. Maximum Idle Time- Enter a maximum idle time during which Internet connection is maintained during inactivity. To disable this feature, en-. If enabled, the device will automatically connect to your ISP after your unit is restarted or when the connection is dropped.

This is considered your internal network. These settings may be referred to as Private settings. You must specify the starting and ending. Click Refresh to update the list. The tunnel technology supports data confidentiality, data origin, authentication and data integrity of network information by utilizing encapsulation protocols, encryption algorithms, and hashing algorithms.

Check here to enable VPN tunnels. Manual key approach indicates that the two endpoint VPN gateways require setting up authentication and encryption key by the Administrator manually. However, IKE approach will perform automatic Internet key exchange. Admins of both endpoint gateways will only need to set the same pre-shared key. For more in depth configuration to adjust manual key or IKE method settings, click.

Enabling this mode will accelerate establishing tunnel, but the device will have less security. It can be a host, a partial subnet or a whole subnet. The preshared key must be the same for both endpoint gateways. The identifier of IKE proposal can be chosen for adding corresponding proposal to the dedicated tunnel. The identifier of IPSec proposal can be chosen for adding the proposal to the dedicated tunnel.

For DES, the encryption key is 8 bytes 16 Char. For 3DES, the encryption key is 24 bytes 48 Char. For MD5, the authentication algorithm is16 bytes 32 Char. For SHA1, the authentication algorithm is 20 bytes. Basic setup includes the setting of following items: local subnet, local netmask, remote subnet, remote netmask, remote gateway, and pre-shared key.

The tunnel name is derived from previous page of VPN setting. Enabling this mode will accelerate establishing the tunnel, but the device will have less security.

Click the button to setup a set of frequent-used IPSec proposals and select from the set of IKE proposals for the dedicated tunnel. Welcome to ManualMachine. We have sent a verification link to to complete your registration.

Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Contents Package Contents If any of the above items are missing, please contact your reseller.

Connections All Ethernet ports auto-sense cable types to accommodate straight-through or cross-over cable. Pressing the Reset Button restores the router to its original factory default settings. Packet filter supported Packet Filter allows you to control access to a network by analyzing the incoming and outgoing packets and letting them pass or halting them based on the IP address of the source and destination.

User-Definable Application Sensing Tunnel You can define the attributes, for instance opening special ports to allow packets to come through, to support special applications requiring multiple connections, such as Internet gaming, video conferencing, and Internet telephony.

Introduction to Broadband Router Technology A router is a device that forwards data packets from a source to a destination. Introduction to Firewalls A firewall is a device that sits between your computer and the Internet that prevents unauthorized access to or from your network. Introduction to Local Area Networking Local Area Networking LAN is the term used when connecting several computers together over a small area such as a building or group of buildings.

Introduction to Virtual Private Networking Virtual Private Networking VPN uses a publicly wired network the Internet to securely connect two different networks as if they were the same network.

This Ports LED blinks during data transmission. For additional information about setting up a network, see: Networking Basics Using the Configuration Menu.

For a typical network setup in a home or small office as shown above , please do the following: You will need broadband Internet access a Cable or DSL subscription line into your home or office. Click Run Wizard The welcome screen outlines the steps to complete the setup wizard. Click Next to continue. Click Next. This information is masked. Type in the new password for the admin account. Support i2eye ALG.

Fix the following problem: 1 Virtual Server doesn't work if public port and private port are not the same. Fix NetMeeting problem of v1. The change will take effect after resetting router setting to factory default. Change the value of Max. Rename from 1. Fix the problem of MAC filter if user setup more than 16 rules. Fix the problem about Dial-up would be hanged after 3 times retry when users ping remote VPN subnet simultaneously.

Fix the problem of IP filter if users input a IP group Fix the problem of firewall if users input a IP group Improve the throughput of IPSec connection. Rename from v1. Change the default connect mode to Connect-on-demand, and set the idle time to 5 minutes. Change firewall mechanisms.

It's recommended to reset configuration to factory default after upgrading to this firmware. Users need to reset router setting to factory default first.

Fix the problem about mail alert function can't transfer mail with some SMTP servers. Replace the real key value with asterisks in VPN configuration pages.